TK Products

TK2002 Waterproofing Coating

A non-breathable, single component, fluid applied foundation coating. This solvent-based, rubberized polymer formulation is used to dampproof and waterproof below-grade concrete surfaces. Available in Residential and Commercial formulations. “VOC” formulation meets VOC content requirements.

Suitable for exterior use on below-grade foundation walls, CMU and poured or precast concrete. TK-HYDROMAX® 2002 should be applied directly to concrete by spray. A typical sprayer is a Graco 733/833 45:1 airless with a 0.039 tip. Brush and/or roller will work for application to smaller areas or for touch ups.

Installation of Dimple Board, Protection Insulation:

Protect TK- HYDROMAX® 2002 from other traffic, construction materials or backfill to avoid damaging it. Once the membrane has properly cured, use a protection/drainage composite with filter fabric. Extruded polystyrene insulation boards are compatible with TKHYDROMAX® 2002 once the product has fully cured.

Features and Benefits

• Bridges cracks up to 1/16″ thick to provide a seamless and continual water and chemical barrier.

• IAPMO (International Association of Plumbing and Mechanical Officials) certified.


Available in Dawn Mist and Stone Gray.
Available in residential and commercial formulations.

Packaged in 55-gallon drums and 5-gallon pails