Demolition Saws

All Products

Husqvarna K970 Concrete Saw

Husqvarna

Sturdy, reliable, light and powerful - the K 970 power cutter is ready to perform when you are. The ultimate choice when you need an all-round cutter performing in the toughest conditions, withstanding climate and fuel variations.

Engine
Cylinder displacement 5.71 cu.inch

Sound and Noise
Sound pressure level at operators ear 104 dB(A)
Sound power level, guaranteed (LWA) 115 dB(A)
Husqvarna K970 Concrete Saw photo

Husqvarna K760 Cut-n-Break

Husqvarna

The Cut-n-Break method is the natural choice when you need to cut deep without overcutting at the corners. The K 760 Cut-n-Break enables you to cut as deep as 16” from one side. The two high-speed blades make a core in the saw cut, which can then easily be broken off using the accompanying breaking tool. This way you easily work your way through the material, at a very low diamond tool and maintenance cost. Delivered with twin blades and a breaking tool.

Engine
Output power 5 hp
Cylinder displacement 4.48 cu.inch
Electrode gap 0.02 in

Cutting equipment
Cutting depth, max 16 in
Blade diameter, max 9 in
Peripheral speed, max 16000 fpm

Sound and noise
Sound power level, guaranteed (LWA) 115 dB(A)
Sound pressure level at operators ear 101 dB(A)

Vibrations
Vibrations left/front handle 1.9 m/s²
Vibrations right/rear handle 2.8 m/s²

Certifications
CE certified Yes
Cert CARB CARB is not applicable for handheld above 65cc, see EPA.
Cert China Yes
Cert EPA Phase 2 Yes
Cert EPA Phase 3 Yes
Cert EU Exhaust emission Yes
Cert machine dir. 2006/42/EC Decl. No. EURO TEST CERTIFICATE SEC/13/2369
Cert sound dir. 2000/14/EC Decl. No. 01/169/031
Husqvarna K760 Cut-n-Break photo

Husqvarna K760 Concrete Saw

Husqvarna

Best-selling all-round power cutter. Light weight and every detail developed with ergonomics in mind. The outstanding power-to-weight ratio, the reliable start and exceptionally low vibrations (below 2.5 m/s²) mean less strain and maximized work time.

Engine
Cylinder displacement 4.48 cu.inch

Sound and Noise
Sound pressure level at operators ear 101 dB(A)
Sound power level, guaranteed (LWA) 115 dB(A)
Husqvarna K760 Concrete Saw photo

Husqvarna K3000 Cut-n-break

Husqvarna

The Cut-n-Break method is the natural choice when you need to cut deep but want a machine with low tool and maintenance costs. The K 3000 Cut-N-Break enables you to cut as deep as 16” from one side. Suitable for flush cutting close to walls and floors as well as for smaller jobs like window openings where you want to avoid overcutting at the corners.

Engine
Rated input power 3.6 hp
Voltage 110-230 V
Frequency 50-60 Hz

Cutting equipment
Cutting depth, max 16 in
Blade diameter, max 90 in
Blade thickness, max 0.1 in
Peripheral speed, max 11810 fpm

Sound and noise
Sound power level, guaranteed (LWA) 109 dB(A)
Sound pressure level at operators ear 95 dB(A)

Vibrations
Vibrations left/front handle 3.2 m/s²
Vibrations right/rear handle 3.4 m/s²
Husqvarna K3000 Cut-n-break photo

Husqvarna FS513 Flat Saw

Husqvarna

This convenient and compact FS 513 is a self-propelled floor saw ideal for asphalt and concrete cutting. Suitable for small to medium-sized service and repair jobs, up to 6.1” cutting depth. The optimal power transmission makes it ideal for more demanding jobs, despite its compact size. User-friendly and developed with a clear focus on your comfort.

Engine
Output power (As rated by the engine/motor manufacture) 11.7 hp
Motor/engine manufacturer Honda
Engine cooling Air
Fuel tank volume 206.3 fl oz

Cutting equipment
Arbor diameter 1 in
Blade depth control Handwheel
Blade diameter, max 20 in
Cutting depth, max 7 in

Transmission
Transmission speed forward 7.92 fpm
Husqvarna FS513 Flat Saw photo
Items marked with Transparent DOT Logo have been approved by the Department of Transportation for the listed state.
Close

Stay informed by subscribing to our newsletter and be among the first to hear about upcoming special events, training opportunities and new product announcements!